Monday, 1 July 2013

Load cell





                        A Load cell is a transducer that is used to convert a force into an electrical signal. This conversion is indirect and happens in two stages. Through a mechanical arrangement, the force being sensed deforms a strain gauge. The strain gauge measures the deformation (strain) as an electrical signal, because the strain changes the effective electrical resistance of the wire. A load cell usually consists of four strain gauges in a Wheatstone bridge configuration. Load cells of one strain gauge (quarter bridge) or two strain gauges (half bridge) are also available. The electrical signal output is typically in the order of a few millivolts and requires amplification by an instrumentation amplifier before it can be used. The output of the transducer can be scaled to calculate the force applied to the transducer. The various types of load cells that exist include Hydraulic load cells, Pneumatic load cells and Strain gauge load cells.

2 comments:

  1. Very informative blog about load cells. other advanced load cells are compression load cell, shear beam load cells, digital load cells, s type load cells. These are most advanced and very accuracy to measure the load

    ReplyDelete
  2. Thank you for your informative post.This post is very useful for me to know more about Digital load cell

    ReplyDelete